| |
Roller Doors
- Ideal for Short Driveways
- Ideal for Oversize Vehicles Such as 4x4's and People Carriers
- Maximises Opening Width - Existing Timber Sub-Frames can be Removed
- Maximises Headroom Clearance
- Ideal for Garages Used as Extra Rooms, Playrooms, Home Gyms, Home Office
- Thermal & Sound Insulation
Space Saving
Roller doors are fitted on the rear face of the garage opening, maximizing width and removing the need for a timber frame.
They are ideal for short driveways because the door rises vertically and does not kickout. Buy Roller Doors Online
Please Note: the headroom clearance required for the coil on the inside of the garage is a minimum of 205mm (Compact Version Only) and 300mm (Standard Version). Not all garages have the room for a roller on the inside, in this case we can supply an externally mounted roller door. See Compact Roller Door for low headroom garages
As a roller door doesn't kick out like an up and over door the smooth vertical lifting action allows you to park right up to the door both internally and on the drive way. There are no horizontal tracks as with other styles of garage door and the tightly coiling curtain creates more space inside your garage to accommodate high top, off-road vehicles or people carriers.
Security & Safety
Because the door is fitted behind the brickwork, has full height steel guides and dual locking bars it provides an excellent level of security and can't be forced open. The aluminium bottom rail reinforces the garage door and holds the rubber seal which stops leaves etc blowing under.
With automated roller garage doors the remote control unit uses a rolling code system and has 2 billion codes offering excellent security. The unit is very quiet in operation and will automatically reverse should the downward movement of the door be restricted.
Roller doors are a must for a garage that is on the building line. If a garage is built directly next to the pavement, it is not permitted for the garage door to swing outwards. In this case a vertically opening roller door presents the best solution.
Click here to watch the Securoglide Security Video >> (Opens Windows Media Player)
Warmth
Insulated roller garage doors are manufactured from strong corrosion-resistant aluminium with an insulating core, making them ideal for converting your garage into a playroom, workshop, gym, home office or storeroom.
Quality & Style
Every door is made-to-measure in accordance with ISO 9001:2000 so that it fits your garage perfectly, SeceuroGlide is available in a range of ten stylish finishes. These durable factory-coated finishes eliminate the need for painting and ensure that your door continues to look good for years and represents a sound investment for your home.
Warranties
Once installed, SeceuroGlide is very low maintenance and comes complete with a comprehensive 2 year guarantee on all manufactured parts and 5 years on the Somfy motor for total peace of mind.
Sizes
All roller doors are made to measure and are available in widths up to 5400mm, and heights up to 3500mm.
Optional Extras
- Choice of Colours or Textured Mahogany, Rosewood or Golden Oak finish
- Manual Override in Case of Power Failure
- Battery Backup
- Infra-Red Photocell Beam for Additional Safety
- Remote Control Digital Keypads for PIN Code Entry
- Fully Enclosed Coil
- Glazed Slats for Natural Light into your Garage
- Vented Slats
Roller Door Section
A Guide to Measuring for a Roller Door
Below is a guide to measuring roller doors. The Roller door dimensions we
require for your order are the Over Guide Width (mm) x Guide Height (mm).
Key:
Standard Roller Doors
The Drive Through Width (DTW) with 75mm Guides is a total of 150mm less than
the Over Guide Width (OGW) except doors over 5200mm where guides are 90mm,
therefore OGW = less 180mm.
Drive Through Height is 78.5mm less than Guide Height
Check you have enough headroom for the roller door headplate, either 300mm
for doors up to 3000mm guide height or 350mm for doors over 3000mm guide
Height
Compact Roller Doors
The Drive Through Width (DTW) with 60mm Guides is a total of 120mm less than
the Over Guide Width (OGW).
Drive Through Height is 55mm less than Guide Height
Check you have enough headroom for the 205mm roller door headplate.
|
|
Quick Links:
|
